High sensitivity scan for over 250 compounds
Detects MVOCs without visual contact or microbial sampling
Scan of compounds off-gassing from solids, semi-solids, water, or liquids
FT-IR Spectrometry can be mobilized in the field to collect and analyze data at or close to the source
FT-IR Spectrometry used in the field to capture real-time data
Analysis of airborne particulates
Custom method development/adaptation
Q.

What is Mold Scan™?
A.
Mold Scan™ is a screening tool for the detection of microbial metabolites known as microbial volatile organic compounds or MVOCs. MVOCs themselves can cause irritation and allergic reactions, but, more importantly, MVOCs are biomarkers for molds that produce toxins that may adversely affect health. For more information see Application Note 523.
Q.

How does Mold Scan™ work?
A.
PATI will send upon request a sample tube to you. Collecting a sample on the sample tube will require a personal exposure pump (200ml/min flow rate). For specific sampling instructions refer to Tech Bulletin 524.
Q.

Does Mold Scan™ have the ability to detect bacteria, both from the air
and surfaces?
A.
The MVOC compounds we monitor using MoldScan™ were specifically selected to detect actively growing mold. They were also specifically chosen to avoid interference from bacterial growth. In short, it is not effective in detecting bacterial growth.

In answer to your second question, PATI specializes in the determination of volatile compounds in the air. The determination of the presence of bacteria in the air and on surfaces is best handled using a mycology laboratory.
Q.

How do I interpret my results?
A.
PATI provides Tech Bulletin 525 with each lab report that explains how to interpret your results.
Copyright © 2003-2006 Prism Analytical Technologies, Inc. All rights reserved.